RAM Wheel Spacers Hub Centric 1994-2024 1", 1.25" 1.5" 2" + Free Lugs

Description

Dodge RAM 5x5.5 Wheel Spacers Hub Centric 1", 1.25", 1.5" 2" | 2012-2018 Models or 2019-2024 RAM Classic 5x139.7 | 77.8mm OEM Bore Solid Forged 6061-T6 Anodized Billet Grade 12.9 Studs + Free Bulge Acorn Black Or Chrome Lug Nuts Included Free With 4 Piece Kit Purchase ONLY!

THESE SPACERS COME WITH 14X1.5 STUDS, THE NEWEST AND SAFEST RAM STUDS ON THE MARKET, BUT THEY WILL WORK WITH 1994-2018 RAM MODELS OR (2019-2024 RAM CLASSIC MODELS ONLY) THEY JUST NEED THE PROPER OPEN END INSTALLATION LUG NUTS! IF YOU LEAVE A NOTE DURING CHECKOUT, WE WILL PROVIDE YOU WITH 9/16-18 LUGS OR 1/2-20 LUGS FOR FREE!

**PLEASE ALWAYS MAKE SURE YOUR STOCK STUDS DO NOT PROTRUDE PAST THE SPACER THICKNESS (EVEN A LITTLE) OR THEY WILL NEED TO BE TRIMMED. **Scroll Down To Read More!**

overview:

OUR WHEEL SPACERS ARE IN A LEAGUE OF THEIR OWN. WE DON'T USE CHEAP CAST ALUMINUM LIKE MAJORITY OF OTHER ONLINE SELLERS! WE ONLY USE TRUE FORGED 6061 T-6 AEROSPACE GRADE HARD ANODIZED BILLET ALUMINUM, AND PAIR THAT WITH GRADE 12.9 STUDS. most American MANUFACTURERS ONLY USE EXTRUDED BILLET THAT ISN'T EVEN FORGED AND USUALLY PAIR THAT WITH GRADE 10.9 CHINESE STUDS! WHAT'S THE POINT OF HAVING AN AMERICAN MADE PART IF THE PART THAT HOLDS ALL THE WEIGHT AND HAS ALL THE RISK, IS A CHEAP CHINESE PART! ASK THEM, IF THEY'RE HONEST, THEY WONT LIE, IF THEY SAY THEY USE AMERICAN MADE STUDS, ASK THEM "WHAT COMPANY MAKES THEM" THEY LIKELY WONT TELL YOU BECAUSE THEY USE CHINESE STUDS! WE'VE BEEN DOING THIS FOR 17+ YEARS WITH A ZERO PERCENT FAILURE RATE! TRUST THE BEST! TRUST SUPREME ENGINEERING TECH - S.E.T gROUP USA!

What's in the set

Sold as 1 single spacer, a 2 piece kit, or a 4 piece kit (4 piece kit comes with 20 free lug nuts!)
Vehicle side center bore: 77.8mm OEM Dodge OEM Bore
Wheel side centering lip: 77.8mm OEM Dodge OEM Wheel Centering Lip Bore
Grade 12.9 heat treated solid steel carbide studs
Open end 14x1.5 grade A+ mounting lug nuts + 20 free closed end on 4 piece purchase

Specifications

Hub bolt pattern	5x5.5 Also Known As 5x139.7
Wheel bolt pattern	5x5.5 Also Known As 5x139.7
Vehicle side center bore	77.8mm OEM RAM Bore
Wheel side centering lip	77.8mm OEM RAM Wheel Centering Lip Bore
Stud thread pitch	14x1.5
Vehicle lug nut thread pitch	14x1.5
Finish	Black
Material	TRUE FORGED 6061 T-6 AEROSPACE GRADE HARD ANODIZED BILLET ALUMINUM

Vehicle Application Guide

8x170 | 124.9mm | M14x1.5

Make	Model	Applicable Years	Fitment Notes
Dodge	RAM 1500	2012-2018	After 2018 RAM Switched To A 6 Lug Pattern
Dodge	RAM Classic	2019-2024	ONLY CLASSIC MODELS ALL OTHER MODELS ARE 6x5.5 BOLT PATTERN
Dodge	RAM	1994-2011	Will Fit All Models But Will Require 9/16-18 or 1/2"-20 Open End Lug Nuts! If You Leave A Note During Check Out We Will Provide For Free!

On smaller screens, swipe left or right to view the full chart.

Disclaimer:

FRONT AXLE (2 SPACERS): It is IMPERATIVE that you trim your studs if they stick out past the face of your spacers. Your stock studs can NOT be longer than the thickness of the spacer. Usually 1.5 Inch clears without trimming, 2 inch always clears. Trimming is a very easy practice MANY of our customers do on a daily basis. You just use the open end lugs we provide as a stopping guide, and trim so the studs are flush with the spacer, then back off the lug so it re-threads the studs. Most shops can do this with ease, or you can do it at home with a dremel, grinder or saw etc...

We offer a USA Lifetime warranty on manufacture defects. No questions asked!

Important information

Torque to your vehicle manufacturer's specification and re-torque after the first 50 to 100 miles. Wheel studs must engage a minimum of the stud diameter in thread. Installation by a qualified technician is recommended.